High Pressure
Showing 1–16 of 23 results
-
8000BS Series- Bellows Stem Seals
Read moreThe 8000 Series the bellow stem seals eliminates fugitive emissions by surrounding the valve with a pressure-tight barrier, isolating the stem from the process fluid and preventing leakage to the atmosphere. For an extra measure of protection, the bellows stem seal option provides a back-up seal of Teflon, braided or Graphite/Grafoil packing.
-
8000T Series Three Way Body
Read moreThe three-way Mark 8000T can be specified for use on mixing or diverting services. As a mixing valve, it is designed with two inlets to blend two separate flow streams into a common outlet creating a third fluid. For diverting service, the valve features on inlet and two outlets, allowing you to divert the flow from one outlet to the other as required to bypass heat exchangers, coolers, filters or other pieces of process equipment. The Mark 8000T is a heavy-duty pneumatic control valve developed for standard or low flow industrial process applications. It is recommended for use when service or environmental conditions may be too harsh for traditional three-way control valves.
Minimum Data Requirements to Size Valve
-
JBDL Series Back Pressure Valves
Read moreThe JBDL Series is a diaphragm operated, balanced trim, back pressure regulator. The 1.95 Cv offers increased flow across its 1200 psi inlet range, while the Kel-F soft seat provides ANSI Class VI shutoff. Four set spring ranges and three soft seal options offer the customer flexibility in a number of applications and environments. These valves are designed to regulate a variety of gases and liquids from pump and compressor control to process pressure control where high flows and low pressures are required.
-
JBPH Series Back Pressure Regulating Valves
Read moreThe JBPH Series is a piston operated back pressure regulator. The 0.5 Cv offers increased flows across its 6000 psi inlet range, while the Kel-F soft seat provides ANSI Class VI shutoff. Four set spring ranges and three soft seal options offer flexibility in a number of applications and environments. These valves are designed to regulate a variety of gases and liquids from pump and compressor control to process pressure control where high flows and high pressures are required.
-
JRDL Series Pressure Regulator
Read moreThe LowFlow JRDL Series line of diaphragm sensed, high pressure regulators have the ability to handle very high pressures and very low flows. These valves are typically used in research and sampling systems for general, corrosive and specialty gas and liquid service. Typical applications include gas chromatography and flame ionization detectors, as well as other industrial controls.
-
JRHF Series Pressure Regulating Valves
Read moreThe JRHF Series is a diaphragm operated, balanced trim pressure regulator. The choice between 1.5 and 1.9 Cv offers increased flows across the JRHF’s 230 psi inlet range, while the PTFE soft seat provides ANSI Class VI shutoff. Four set spring ranges and three soft seal options offer the customer flexibility in a number of applications and environments. These valves are designed to regulate a variety of gases and liquids in applications where high flows and low control pressures are required.
-
JRPH/JRPL Series (1/4″) Pressure Regulator
Read moreThe 1/4″ JRPH/JRPL Series are piston operated, balanced trim pressure regulators with high pressure capability and PEEK or KEL-F soft seat for ANSI Class VI shutoff. There are four set ranges for this model. Elastomer seals are used throughout with Buna-N, EPDM, and Viton being standard options. These valves are designed to regulate a variety of general, corrosive and specialty gases, water, acids and oils.
-
JRPHH Series Hydraulic High Pressure Regulator
Read moreThe hydraulic, high pressure JRPHH Series pressure reducing regulators are piston sensed and designed for inlet and outlet pressures up to 10,000 psig (689 bar). JRPHH Series regulators feature a wide range of inlet and outlet configurations, Cv: 0.06 or 0.2, adjustable captured venting and compatibility with a broad range of media.
-
JRPL/JRPH Series Pressure Regulators
Read moreThe JRPL Series and JRPH Series are piston operated, balanced trim pressure regulators with high Cv’s and Kel-F soft seat for ANSI Class VI shutoff. There are three set ranges for each model. Elastomer seals are used throughout with Buna-N, EPDM and Viton being standard options, along with PTFE split ring back up seals. These valves are designed to regulate a variety of gases, water, acids and oils.
-
Mark 6800HP Series – High Pressure Regulating Valve
Read moreThe Mark 6800HP is a self-operated pressure regulating valve for use on high pressure industrial gas and liquid services to 4000 psi (276 bar). The Mark 6800HP features exceptional accuracy with high flow capacities and simple in-line maintainability.
-
Mark 708BS Series with Bellow Stem Seals
Read moreThe Mark 708 with bellows stem seals that eliminate fugitive emissions by surrounding the valve stem with a pressure-tight barrier, isolating the stem from the process fluid and preventing leakage to the atmosphere.
-
Mark 708CR Series for Cryogenic Service
Read moreMark 708CR Series – The Mark 708 for cryogenic service features a 9” bonnet extension that provides protection for the packing and actuator by preventing ice build-up, which can interfere with movement of the valve stem and affect valve performance. For cryogenic services with temperatures as low as -425°F (-254°C).
Minimum Data Requirements to Size Valve
-
Mark 708DP Series – Double Packing Control Valve
Read moreMark 708DP Series – The Mark 708 with double packing is an alternative to a bellows stem seal and is used when standard packing will not adequately contain the controlled media. The optional bonnet features a double packing arrangement separated by a lantern ring. With a double packed bonnet, lubricant is pumped into the packing sets, supplying a tight seal similar to that provided by a bellows stem seal. The double packed bonnet is an excellent choice when service conditions could cause damage to a bellows assembly.
-
Mark 708HP Series 8000 psi Control Valve
Read moreThe Mark 708HP is a 8,000 psi (552 bar) maximum inlet fractional flow control valve. This rugged, compact control valve is suitable for a variety of industrial and research applications. It is ideal for offshore chemical injection, hydrocarbon processing, chemical processing, high effort hydraulic actuators and many other high pressure applications. Linear and equal percentage flow characteristics are available with Cv’s ranging from 0.05 (0,04 Kv) to 1.25 (1,1 Kv). In addition, the Mark 708HP is available in a variety of end connections and optional materials of construction making it a versatile solution to your demanding valve requirements.
Minimum Data Requirements to Size Valve -
Mark 708HPA Series Control Valve
Read moreThe Mark 708HPA is a 12,000 psi maximum inlet fractional flow control valve. This rugged, compact angle body control valve is suitable for a variety of high pressure industrial and research applications. The extended pressure capability makes it the ideal valve for offshore well system chemical injection. Linear and equal percentage flow characteristics are available with Cv’s ranging from 0.05 (0,04 Kv) to 1.25 (1,1 Kv). In addition, the Mark 708HPA is available in a variety of end connections and optional materials of construction making it a versatile solution to your most demanding valve requirements.
Minimum Data Requirements to Size Valve -
Mark 708HT Series Control Valve
Read moreThe Mark 708HT Series has a cooling fin bonnet option for protection of the stem packing from elevated temperatures associated with steam, hot water and high temperature oil, gas and liquid services. The finned bonnet cools the area around the packing, which permits the use of standard packing materials that otherwise would not be suitable for the service temperature conditions.